10 min read

How to Funding Arbitrage: 50-1000% APY + free perpDEXs points

Source: http://x.com/i/article/2040041092356382720

~74% of wallets lose on Hyperliquid. You’re competing with HFT traders, MMs and quants But there’s another way: stop guessing price. Go delta-neutral funding farming. The profits can be as follows:

  • 100–1000% annual yield
  • Farming free points on perp DEXs

All you need to do is:

  • Long the token on one exchange
  • Short the same token on another exchange

That’s it.

This is called a delta-neutral position. You don’t care about price movements, you are hedged on both sides.

For example,

  • We shorted HYPE on Hyperliquid for $1000
  • We longed HYPE on Lighter for $1000

Let’s say the price goes up by +50%

  • Lighter = +$500
  • Hyperliquid = -$500

Overall, we are at zero. So where does the profit come from?

The profit comes from funding arbitrage. But first, we need to understand what funding rate is.

What is funding rate

Funding (funding rate) is a key mechanism in the perpetual futures market designed to keep the price of a futures contract aligned with the price of the underlying asset on the spot market

Image

Since a futures contract is not the actual token but just a contract on it, its price is formed based on supply and demand within a specific order book and can deviate from the real market (index) price. Funding incentivizes traders to open positions that help balance the market.

How the payment mechanism works

Positive funding (+): When there are more longs and the futures price is above the spot price, longs pay shorts. This incentivizes closing long positions and opening shorts, pushing the price down toward spot.

Negative funding (-): When shorts dominate, they pay longs. This encourages buying, pulling the futures price up.

For example, in the screenshot, there is a futures contract for HYPE on Hyperliquid. The funding rate is -0.0019% per hour, or -16.89% annually.

Image

The funding is negative, which means longs pay shorts. For example, if I long HYPE with $10,000 and the rate stays the same, I will receive approximately $1,680 in funding over a year.

But if I short HYPE instead, I will pay that $1,680.

What is funding arbitrage

Hopefully you already understand that we need to find an exchange where we can short HYPE and profit from the funding rate difference.

I specifically built a free parser for this to find setups. It tracks 48 perp DEXs and CEXs: https://perpdexlist.com/funding-arbitrage![Image](https://pbs.twimg.com/media/HE-43zhbsAAhEcr?format=jpg&name=large) We can see that on Extended we can short HYPE with a funding rate of +11.39%, meaning that on $10,000 we would earn approximately +$1,139 per year.

And on Hyperliquid we long HYPE with a funding rate of -16.83%, earning about +$1,683 per year on that position.

Total:

  • Capital deployed – $20,000
  • Profit per year = $2,822

And the best part is that we can use leverage. For example, with 3x leverage, that becomes $8,466 per year.

And it doesn’t matter where the price of HYPE goes – up or down.

HYPE is a very conservative setup. Sometimes there are cases like in the screenshot below:

Image

PIPPIN = 19,410% APY. Such yields usually appear during sharp price movements – listings, pumps, dumps, delistings, etc.

But it’s not that simple...

Types of funding arbitrage strategies

There are several ways to use funding arbitrage:

Futures + Futures funding arbitrage.

This is our main strategy.

Spot + futures.

Time spread.

Now let’s go through each of them in more detail

1. Futures + Futures Funding Arbitrage

We won’t spend much time on this since we already covered it.

Image

https://perpdexlist.com/funding-arbitrage ## 2. Spot + Futures Funding Arbitrage

Same idea, but on one leg we buy the token on spot.

Why do this?

It’s simple – lower risk. In Futures + Futures, both sides of your position can get liquidated. Here, one side (the spot tokens) will always remain with you.

For example, there is a large fund called Abraxas Capital with over $1B under management, and they use this exact strategy. Below is a screenshot of their wallet on Hyperliquid.

Image

With such a large capital, they generated a 12% return in 2025. For reference, the Fed rate is around 3.75%, so they outperformed it by almost 4x. This shows that funding arbitrage as a strategy can absorb a significant amount of capital. Below is a screenshot.

Image

3. Time spread

Roughly speaking, the inefficiency is as follows:

  • Exchange 1 – funding -2% – we go long and receive 2%
  • Exchange 2 – funding -2% as well – we go short and pay 2%

So our total profit is 0%. What’s the catch?

The key is that different exchanges have different funding intervals:

  • Exchange 1 – every 1 hour
  • Exchange 2 – every 4 hours

This means that on exchange 1 we receive 2% every hour, while on exchange 2 we only pay 2% after several hours.

This is clearly illustrated in the post below.

https://x.com/cryppimagic/status/2036795669609124135

What deposit is needed

Any. Absolutely any. Whether it’s $100, $1M, or even $1B (as shown in the example with the fund above). And if you have more than $1B sitting idle and you’re reading this, just DM me, I’m ready to work as your assistant haha.

That said, returns can vary depending on your capital. It’s unlikely you’ll be able to enter a 10,000% APY farm with $1M. There simply won’t be enough liquidity.

Where to find opportunities

It’s very simple. There are two ways.

1. Manually go through exchanges and check the available funding rates

Fortunately, on most platforms you can filter tokens by funding rate.

Image

But sometimes exchanges make things easier and provide funding arbitrage tables like the one below.

Image

But lol, only 4 exchanges???

In general, you can do it manually, I did the same at the beginning of my funding arbitrage journey, but there’s not much point since you won’t discover 99% of the best opportunities.

2. My parser for finding funding arbitrage https://perpdexlist.com/funding-arbitrage![Image](https://pbs.twimg.com/media/HE_VFx8aUAAREu0?format=jpg&name=large) I spent a long time building this project, and I can confidently say – it will answer all your questions when it comes to finding funding arbitrage setups.

I collect data in real time from 48 exchanges (30 perp DEXs and 18 CEXs).

And the best part is that you can evaluate how stable a setup is using the backtesting system. For example, in the screenshot below you can see that the ARB setup on Extended + Hyperliquid was showing around 40–50% annualized yield for about two days.

Image

This allows you to identify real setups rather than outliers that will collapse immediately.

And it’s completely free. Use it - https://perpdexlist.com/funding-arbitrage

How to enter/exit trades

Let’s say we found a setup, what do we do next?

Image

For example, a setup – 0G on Hyperliquid short + Lighter long with around 100% annual yield.

Order book and price analysis

In the screenshot – Lighter is on top, Hyperliquid is below.

Image

We need to make sure the order book spread is not too large. What you see in the screenshot is roughly fine. Sometimes the spread can be significant, for example 0.3–1%, and entering positions with market orders could instantly cost us 1–2%.

It is also very important that prices on both exchanges are the same, otherwise you might enter a so-called negative price spread. For example:

  • Lighter – short at $90
  • HL – long at $110

At some point the prices will converge, let’s say to $100, and we will lose 20% because of this.

  • Loss on long: 110 → 100 = -9.09%
  • Loss on short: 90 → 100 = -11.11%

But sometimes the price spread works in our favor, and we can capture both funding and the price spread.

It is also very important to use isolated margin, it is safer and more convenient.

Entering the position

It is important to enter with the same number of tokens. In our case, with 3x leverage, that’s 570 tokens of 0G on each side.

Image

I will enter with a market order and pay a small order book spread on both sides, around 0.1%, but this will quickly be recovered since we plan to hold the position for a long time.

However, there are other ways to enter:

  • Market order on one side + limit order on the other side

This way, we wait for the limit order to fill and then immediately open the market position. I recommend placing the limit order on the exchange with a weaker order book.

  • Limit order + limit order

This requires some skill, since prices differ slightly between exchanges and both limit orders won’t fill at the same time.

Stop losses + take profits

Now one of the most important parts.

The logic is simple. We need to set stop losses on each exchange 5–10% before the liquidation price. For example, on Hyperliquid the liquidation price is 0.60053, so we set the SL at 0.59. On Lighter the liquidation price is 0.4379, so we set the SL at 0.45.

It is also very important to set take profits on both exchanges. How? The logic is very simple. SL on Hyperliquid = TP on Lighter, and the same applies in reverse.

I call this mirrored SL and TP.

As a result, we stay within a range between 0.59 and 0.45 on both exchanges.

Image

Here’s what the SL and TP setup process looks like visually

Image

But it’s very important – it can happen that on one exchange the TP or SL gets triggered, while on the other it misses by a tiny amount and the position remains open.

For example, on Hyperliquid the SL gets hit and we take a $36 loss, but on Lighter the price misses the TP by just $0.0001 and then reverses, and we can also end up in a loss there.

How to exit the position

The logic is exactly the same as for entry. Either use a market order, or a limit order + market order, or limit order + limit order.

What are the risks?

Yes, 1000% APY sounds attractive, but there are many caveats. It may seem like our positions are delta-neutral, but in reality it’s only pseudo delta-neutral.

Funding flips

We already touched on this, but it’s probably the key risk.

Future funding cannot be predicted, but you can analyze historical behavior. Fortunately, there are backtests available on my site – https://perpdexlist.com/funding-arbitrage![Image](https://pbs.twimg.com/media/HE_zXTubQAATL_W?format=jpg&name=medium) It’s also very possible that funding can flip literally seconds before the payment.

Price spread

The difference in asset price between two exchanges. You might enter at unfavorable prices, and funding may not compensate for that gap for a long time.

Order book spread

The difference between bid and ask. If liquidity is low, entry and exit (slippage) can eat a significant portion of profits.

Fees

Opening and closing positions, especially with market orders, incurs fees. If you hold the position only for a few hours, funding may not cover these costs.

ADL (Auto-Deleveraging)

During high volatility, forced position reductions can occur.

Let’s look at an example:

The price suddenly drops, like it did for example on October 10, 2025, when many tokens fell by -80% almost instantly.

Image

It may seem fine - the short should offset the loss on the long, but… many shorts were force-closed before TP, resulting in a significant overall loss.

Stop loss / take profit not triggering

As mentioned earlier, TP or SL may trigger on one exchange but miss slightly on the other. If the price reverses, you end up in a loss.

There is also another issue with SL. During high volatility, your stop loss might not execute at the intended level and can slip further, closing at a worse price.

Max OI Capacity

On new or low-liquidity tokens, exchanges may limit the maximum position size, preventing you from entering with the desired size or hedging effectively.

You might open a position on one exchange, but find an OI limit on the other. It’s not critical, but it can waste time.

Delistings and exchange risk

There is always a risk of account restrictions, protocol hacks, or platform failure (Drift was hacked recently, lol). On newer perp DEXs, smart contract bugs or oracle manipulation are also possible.

Premarkets

I recommend avoiding them. Otherwise, you might end up in situations like with XPL on Hyperliquid, where funding looked great, but the token suddenly pumped +250% while nothing happened on other exchanges.

Image

The end

Funding arbitrage is not a silver bullet and there are still many nuances here, but you don’t need to predict the price like in trading. hope this article helped you understand a new niche for you

I think you already know haha, but you can find all funding farming setups on my site - https://perpdexlist.com/funding-arbitrage Hope this article was useful for you. Bookmark it and drop a like - I'd appreciate it.

Follow me to get more insights on perp DEXs and funding arbitrage - @cryppimagic 📎 Disclaimer: This is not financial advice. I'm sharing my approach for educational purposes. Do your own research. PerpDEXes carry risk of total loss.